Huali Airlines International Cargo serves its customers and provides the following services in Hong Kong:
(1) Bulk cargo
1. Select the applicable tools and adopt the correct loading and unloading process according to the performance, shape and working environment of the material;
2. Do a good job in cooperation between machinery and machinery, machinery and manpower, and safe operation;
3, manpower to handle larger goods should pay attention to whether there are cracks, the risk of collapse, the application of the crowbar that is not easy to move, can not be pulled by hand,
When the foot pedal is moved, it should be moved from top to bottom step by step, and it is strictly forbidden to dig to prevent landslide;
4. After the completion of the operation, it is necessary to achieve "great clearance".
(2) Barreled materials
1. Adopt suitable rigging (iron hook, barrel hook);
2. Before lifting, you should hold the hook with your hand, and let go of your hand completely, and stabilize the suspension and fall steadily;
3. When unloading, it should be from top to bottom, and it shall not be extracted from the bottom layer, and the barrel mouth shall be determined to face up or sleeper according to the requirements;
4. Loading the car is not less than 2 people.
iii) Pay attention to the safety of the goods during work breaks, and personal safety:
1. When unloading the goods and opening the car door, try to open the door slowly to prevent the door from opening too quickly and causing the goods to suddenly fall and hurt people;
2. When the forklift is operating, someone must assist in commanding at the same time, and the personnel who carry out loading and unloading operations on the side should always pay attention to avoidance;
3. When the loading and unloading workers stack the stacks, they should pay attention to the stability of the stacks, and if they need to add more goods to them, they must assist in completing.
in case the goods fall or the stacks are tipped over and injured;
4. When the stevedorer rests during the shift, do not be too close to the stack of higher stacks or store goods with poor safety.
5. When ascending operations, it should be operated with caution to prevent high-altitude falls and cargo smashing.
(4) Packaging goods
1. According to the packaging and nature of the goods, the tool trays are selected and matched;
2. When loading the car, it should be smooth and firm, neat and tidy, and the number of points should be clear;
3. There are not less than 2 workers when loading the car
(5) Dangerous categories
1. Before shipping dangerous goods, we should understand the characteristics of the dangerous goods loaded, and take the necessary safety measures for fire prevention, explosion prevention, poison prevention, corrosion prevention, radiation prevention and other aspects according to the requirements.
Hold a good pre-work meeting and formulate the correct working methods;
2. Strictly prohibit fireworks, eliminate all kinds of fire, strictly prohibit iron impact, wear spiked shoes, and prevent friction and fire;
3. The operator and the vehicle should have a dangerous goods operation certificate and a permit for transportation, so that the person is fixed and the vehicle is fixed, and the fire fighting equipment will be correctly functioned;
4. Wear the necessary protective equipment according to the regulations, the rigging facilities in operation should meet the requirements of dangerous goods operation, and when using mechanical loading and unloading, the load should be reduced by 25% according to the regulations;
5. The loader is not less than 2 people, depending on the operation situation, the safety officer should supervise according to the actual situation;
6. Take the necessary ventilation measures, operate cautiously, handle it lightly, pay close attention to the dynamics around the work site, and prevent the occurrence of accidents such as poisoning, fire, and explosion;
7. In the process of operation, it is generally not suitable for eating and drinking, and the used protective equipment should be washed separately, and the operators can enter other places after bathing;
8. After the operation is completed, the cleaning work should be done well, and no acid, alkali, oil or dangerous substances should be left;
